What Does Gutter Installation Include?
At Denver Roofing Team, gutter installation means a complete, custom-fit system designed for your home’s specific roofline and drainage needs. We start by removing old gutters and inspecting the fascia for rot or damage. Then we fabricate seamless aluminum gutters on-site using a portable roll-forming machine — this eliminates joints that commonly leak on sectional gutters. Every section is hung with hidden hangers spaced 24 inches apart for maximum support under snow loads. We install downspouts at every low point, with splash blocks or underground extensions to carry water at least 5 feet from the foundation. All seams are sealed with high-grade silicone, and we test the system with a hose to confirm proper flow. This is the same process we’ve refined over 19 years of serving Denver homeowners.
How Much Does Gutter Installation Cost in Denver?
For a typical Denver single-family home (1,500–2,500 square feet), expect to pay between $1,200 and $2,800 for seamless aluminum gutter installation. That includes materials, labor, and removal of old gutters. Pricing varies by linear footage — most homes need 150 to 250 feet of gutter — and by gutter style. K-style gutters are standard and cost $6–$10 per foot installed. Half-round gutters run $8–$14 per foot. Adding gutter guards adds $3–$7 per foot. We provide a free, no-obligation estimate after measuring your roofline in person. There are no hidden fees, and we itemize every cost so you know exactly what you’re paying for.
What Gutter Materials Do You Offer?
We install three primary materials, each suited to different budgets and aesthetics. Seamless aluminum is our most popular choice — it’s lightweight, rust-proof, and available in 20+ colors to match your trim. We use .027-inch or .032-inch gauge for extra durability. Copper gutters are a premium option for historic homes or high-end builds; they develop a natural patina over time and can last 50+ years. Copper runs $15–$25 per foot installed. Steel gutters (galvanized or Galvalume) offer superior strength but require painting and are heavier; we only recommend them for flat-roof commercial applications. For Denver’s climate, seamless aluminum with a baked-on enamel finish delivers the best balance of longevity, cost, and curb appeal.
How Long Does Gutter Installation Take?
Most residential gutter installations are completed in one day. Here’s the typical timeline: morning arrival, old gutter removal and fascia inspection (1–2 hours), on-site gutter fabrication (30 minutes), hanging gutters and downspouts (2–3 hours), sealing and testing (1 hour). For homes with complex rooflines, multiple stories, or extensive fascia repair, the job may stretch to two days. We schedule work Monday through Saturday and give you a firm completion window before we start. Weather delays are rare in Denver’s dry climate, but we won’t install in rain or high winds — safety first.
Do You Offer Gutter Guards?
Yes. We install two types of gutter guards: micro-mesh screens and reverse-curve hoods. Micro-mesh screens block pine needles, leaves, and roof grit while allowing water to flow through thousands of tiny holes — they’re ideal for homes near trees. Reverse-curve hoods use surface tension to direct water into the gutter while debris slides off; they work well on steep roofs. Both systems are made of aluminum or stainless steel and come with a 10-year warranty. We don’t recommend foam inserts or brush-style guards — they trap moisture and accelerate gutter corrosion. Our installers will help you choose the right guard for your roof pitch and surrounding foliage.
How do I know if my gutters need replacing?
Look for these signs: visible cracks or rust spots, gutters pulling away from the fascia, standing water after rain, peeling paint on the siding below the roofline, or water stains in the basement. If your gutters are over 20 years old, replacement is usually more cost-effective than repeated repairs.
What About Downspout Extensions and Drainage?
Proper drainage is just as important as the gutters themselves. We install downspout extensions that carry water at least 5 feet from the foundation — farther if your soil slopes toward the house. Options include corrugated plastic extensions (low-cost), rigid aluminum extensions (more durable), and underground PVC drains tied into a French drain or dry well. We also install splash blocks to prevent soil erosion. In Denver’s clay-heavy soil, we recommend underground drains to avoid foundation settling. Our crew will evaluate your yard’s grading and recommend the best solution during the estimate.
Do You Repair Existing Gutters?
We do, as long as the gutters are structurally sound. Common repairs include re-sealing leaking joints, re-hanging sagging sections, replacing damaged downspouts, and installing new hangers. We don’t patch holes or splice in mismatched sections — that’s a temporary fix that leads to more problems. If your gutters are more than 50% compromised, we’ll recommend full replacement. Our honest assessment saves you money in the long run.
Why Choose Denver Roofing Team for Gutter Installation?
We’re a local, family-owned Denver roofing contractor with 19 years of experience. Every gutter crew is led by a foreman with at least 10 years in the trade. We self-perform all work — no subcontractors — so quality control is guaranteed. Our seamless gutters come with a 5-year workmanship warranty, and the manufacturer’s 20-year paint warranty covers chipping and fading. We’re licensed (CO #123456), insured, and carry workers’ comp. You’re not just hiring a gutter installer; you’re hiring a team that treats your home like our own.